An extremely responsive high-speed pump.

The PVG is a variable-displacement, axial-piston pump with fast control response. The PVG thrives on low viscosity fluids and is available in a variety of control and porting options. It is designed to be a high-performance solution for your demanding applications.

Oilgear makes some of the longest-lasting, most reliable pumps in the world.  Learn more about the proprietary design of the Oilgear variable-displacement, axial-piston pump line.

PVG open loop, axial piston hydraulic pumps by Oilgear offer high-pressure and superior performance in a compact design. PVG pumps provide an almost instantaneous response to system commands through a high-response four-way pilot-operated control – a first for this size and price of pump.

Available in multiple frame sizes and five displacements, high-performance PVG pumps feature Oilgear’s advanced “hard-on-hard” rotating system that provides longer operational life, resistance to contamination, and allows for operation with low-viscosity or other special fluids. And, its unique hydrodynamic bearing support on the cylinder barrel contributes to the pump’s compact design.

All Oilgear pumps are designed to thrive on low-viscosity fluids, such as high water content and fire resistant fluids, like Skydrol™, Stack Magic™, Erifon™, and 98/2.  Learn more here:  Fluid Compatibility of Oilgear Pumps.



LengthWidthHeightWeightFace Mounting
B12.0303,96.9174,56.3160,46831SAE “B” 2 & 4 Bolt



Theoretical Maximum Displacementin^3/rev4.60
Rated Continuous Pressurepsi3750
Peak Pressurepsi4250
Flow Rate at 1800 RPM, rated continuous pressure & 14.7 psi (1.01 bar abs) inlet conditionsgpm33.3
Maximum Speed rpm2700
Power Input at rated continuous pressure & 1800 rpmhp89



Curves based on an oil temperature of 125º F (160 SSU) and 14.7 psia (1 bar absolute). Efficiency curves are based on pump running at 1800 rpm.



  • Four-way pilot-operated variable displacement control
  • SAE heavy duty shaft
  • Sealed front shaft bearings
  • Patented pressure-lubricated swashblock
  • Hardened steel shoes running on hardened swashblock surface
  • Swashblock with polymerous bearings
  • Cylinder mounted polymerous journal bearings
  • Hardened cylinder surface running on hardened valve plate
  • Quiet valve plate design


  • Below is a partial list of configuration options.  Please see product documentation for more detail and additional options.
    • Thru-shaft for driving multiple pumps off of one motor
    • 5 different shaft configurations for different torque ratings and tooth counts
    • SAE “B” 2 or 4 bolt mounting
    • Viton, buna nitrile, or EPR seals
    • Volume reduction stops
    • Left or right hand rotation
    • Side ported or rear ported
    • Control options include:
      • Pressure compensating
        • Single setting
        • Dual setting
        • Proportional device
        • Soft start
        • Electronic displacement control (EDC)
        • Load sense
        • Load sense with horsepower limiter
        • Horsepower limiter
        • Load sense plus
        • Horsepower limiter with load sense plus
      • Electrohydraulic (with feedback)
      • Solenoid operated volume
      • Fixed displacement




47019K PUMPS PVG | PDF | 2 MB
PVG 048 065 075 100 130 150 & 180 Pump Line  Sales Bulletin 47019-K for Ordering Information Features Benefits Specifications and Pump Control Options 3/2018
47945A  PUMPS  PVG | PDF | 171 kB
PVG 048 065 075 100 130 & 150 Gear Pump  Installation Data Sheet 47945-A for Gear Pump Prince/Haldex 01/2011
847019C  PUMPS  PVG | PDF | 86 kB
PVG Pump Application Guidelines  Technical Bulletin 847019-C 9/2010
PVG 048 065 075 F1U Series P-1NN/F Control  Instructions Bulletin 947652 for Single Pressure Control with Load Sense 10/2009
PVG 048 065 075 F1U Series P-1NN/H Control  Instruction Bulletin 947653 for Single Pressure Control with Horsepower Limiter 10/2009
PVG 048 065 075 F1U Series P-2NN/H Control  Instruction Bulletin 947659 for Dual Pressure Control with Horsepower Limiter 10/2009
47953C  PUMPS  PVG | PDF | 167 kB
PVG 048 065 075 F1 Series Pump  Installation Data Sheet 47953C for Pump without Control Side Ported 10/2009
47958A  PUMPS  PVG | PDF | 207 kB
PVG 048 065 075 F1 Series Pump Adapter  Installation Data Sheet 47958A for Dual Pump Adapter 7/2010
PVG 048 065 075 100 & 130 Pump  Instruction Bulletin 947019-B for Pump Service Parts List 12/2003
47954  PUMPS  PVG | PDF | 119 kB
PVG 048 065 075 Basic Pump w/out Control Thru Shaft  Installation Data Sheet 47954 01/2006

In order to download, some browsers may require right click and save as.

Modeled with basic pressure compensation control module.

PVG_048_065_075 | IGS | 7 MB
PVG_048_065_075 | STP | 3 MB