ALTERNATE Oilgear Axiality...

The flagship, high-horsepower pump.

The PVV line of Oilgear pumps represents the pinnacle of performance in a variable-displacement, axial-piston pump. Pressure and flow demands continue to rise for our customers. The PVV is a pump that rises to the challenge.

Oilgear makes some of the longest-lasting, most reliable pumps in the world.  Learn more about the proprietary design of the Oilgear variable-displacement, axial-piston pump line.

Designed for power and speed, PVV open-loop, axial-piston hydraulic pumps by Oilgear deliver the punch that is required for large, heavy-duty systems.  Utilizing advanced engineering, the PVV pump line delivers up to 560 horsepower – four times the horsepower at approximately one-third the cost of other models.  Computer-optimized for maximum performance, PVV is compact in design and available in several displacements.

PVV pumps offer a large selection of controls that are readily interchangeable.  With improved high-response controls and reduced noise levels, the rugged cylinder design of the PVV pump enhances optimal performance.  The patented design of its pressure lubricated swashblock offers high performance for high-cycling operations, and contributes to the pump’s ability to run on low-viscosity and other special fluids.

All Oilgear pumps are designed to thrive on low-viscosity fluids, such as high water content and fire resistant fluids, like Skydrol™, Stack Magic™, Erifon™, and 98/2.  Learn more here:  Fluid Compatibility of Oilgear Pumps.

 

NOMINAL DIMENSIONS

Frame
Size
Length Width Height Weight Face Mounting
in. mm in. mm in. mm lbs kg
20.93 531,6 21.11 536,2 15.40 391,2 735 333 ISO 250 4-Bolt

 

NOMINAL OPERATING PARAMETERS

Theoretical Maximum Displacement in^3/rev 33.00
ml/rev 540
Rated Continuous Pressure psi 5000
bar 345
Peak Pressure psi 5800
bar 400
Rated flow at continuous rated pressure:  Non-Supercharged 1000 rpm 129 gpm
488 lpm
1200 rpm 155 gpm
587 lpm
1500 rpm      *
     *
 
   
 
Maximum Speed rpm 1200

* Consult Oilgear Technical Sales Department.

 

NOMINAL PERFORMANCE

Curves based on an oil temperature of 125º F (160 SSU) and 14.7 psia (1 bar absolute). Efficiency curves are based on pump running at 1200 rpm.

Oilgear PVV-540 Performance Curve

 

  • Swashblock & integral saddle with polymerous bearings
  • Keyed or splined shaft
  • Patented pressure lubricated swashblock design
  • Sealed front shaft bearing
  • Piston shoes run on flat steel thrust plate
  • Mechanically retained shoe
  • Replaceable hardened cylinder wear plate & bronze port plate
  • Cylinder mounted polymerous journal bearings
  • Quiet port plate design

Below is a partial list of configuration options.  Please see product documentation for more detail and additional options.

  • Thru-shaft for driving multiple pumps off of one motor
  • 3 different shaft configurations for different torque ratings and tooth counts
  • ISO 250 4 bolt mounting
  • Viton, buna nitrile, or EPR seals
  • Volume reduction stops
  • Left or right hand rotation
  • Side ported or rear ported
  • Control options include:
    • Pressure compensating
      • Single setting
      • Dual setting
      • Triple setting
      • Proportional device
      • Soft start
      • Remote control
      • Load sense
    • Electrohydraulic (with feedback)
    • Solenoid operated volume
    • Fixed displacement

 

847028D  PUMPS  PVV | PDF | 81 kB
PVV 200 250 440 & 540 Application Guidelines  Technical Bulletin 847028D Application Guidelines 2/2010
PVV 200 250 440 & 540 Pump  Sales Bulletin 47028E for Ordering Information Features Benefits Specifications and Pump Control Options 02/2010
PVV 540 V V Control  Parts Drawing Data Sheet 947728 08/1996
947028  PUMPS  PVV | PDF | 363 kB
PVV 540 Pump  Instruction Bulletin 947028 for Pump Service and Parts List 3/1993
47168  PUMPS  PVV | PDF | 110 kB
PVV 540 B1 Series F Fixed Pump Control  Installation Data Sheet 47168 for Fixed Pump Control Screw Adjustable 10/2002
PVV 540 B1 Series Amplifier Pump Control  Installation Data Sheet 47428A for Force Amplifier Pump Control 01/2003
47513  PUMPS  PVV | PDF | 179 kB
PVV 540 B1 Series P-1NN/G or P-C/G Pump Control  Installation Data Sheet 47513 for Single Pressure or Soft Start with Horsepower Limiter & Load Sense Pump Control 10/2002
47514  PUMPS  PVV | PDF | 160 kB
PVV 540 B1 Series P-2 or P-D Pump Control  Installation Data Sheet 47514 for Dual Pressure or Dual Pressure Soft Start Pump Control 10/2002
47515  PUMPS  PVV | PDF | 162 kB
PVV 540 B1 Series P-3 or P-E Pump Control  Installation Data Sheet 47515 Triple Pressure Control or Triple Pressure Soft Start 10/2002
47516  PUMPS  PVV | PDF | 191 kB
PVV 540 B1 Series P-2 or P-D Pump Control  Installation Data Sheet 47516 Dual Pressure with Load Sense and/or Horsepower Limiter Pump Control 10/2002
47517  PUMPS  PVV | PDF | 227 kB
PVV 540 B1 Series P-A or P-B Pump Control  Installation Data Sheet 47517 for Electronic Proportional Pressure with Load Sense and/or Horsepower Limiter Pump Control 10/2002
47558  PUMPS  PVV | PDF | 157 kB
PVV 540 B1 Series P-1NN/F or P-C/F Pump Control  Installation Data Sheet 47558 for Single Pressure or Soft Start with Load Sense Pump Control 10/2002
47559  PUMPS  PVV | PDF | 146 kB
PVV 540 B1 Series P-1NN or P-C Pump Control  Installation Data Sheet 47559 for Single Pressure or Soft Start Pump Control 10/2002
47569  PUMPS  PVV | PDF | 156 kB
PVV 540 B1 Series P-RNN or P-RNN/H Pump Control  Installation Data Sheet 47569 for Remote Pressure or Remote Pressure w/Horsepower Limiter Pump Control 10/2002
47642  PUMPS  PVV | PDF | 141 kB
PVV 540 B1 Series RU Pump Control  Installation Data Sheet 47642 for Solenoid Operated Two Volume Pump Control 10/2002
47729A  PUMPS  PVV | PDF | 162 kB
PVV 540 B1 Series VM Pump Control  Installation Data Sheet 47729A for Servo Valve Pump Control 10/2002
47737  PUMPS  PVV | PDF | 134 kB
PVV 540 B1 Series VR Pump Control  Installation Data Sheet 47737 for Remote Servo Valve Pump Control 10/2002
47940A  PUMPS  PVV | PDF | 360 kB
PVV 540 B1 Series Pump  Installation Data Sheet 47940A for Pump Without Control Side Ported 10/2002
947528A  PUMPS  PVV | PDF | 682 kB
PVV 540 B1 Series Pump Control  Parts Data Sheet 947528A for P Pressure Pump Control 10/2002
947728  PUMPS  PVV | PDF | 222 kB
PVV 540 B1 F Fixed Pump Control  Parts Data Sheet 947728 F Fixed Screw Adjustable Pump Contol 10/2002
947729A  PUMPS  PVV | PDF | 319 kB
PVV 540 B1 Series VM Pump Control  Parts Data Sheet 947729A for Servo Valve Pump Control 10/2002
M47168  PUMPS  PVV | PDF | 111 kB
PVV 540 B1 Series F Fixed Pump Control  Metric  Installation Data Sheet M47168 for F Fixed Volume Pump Control (Screw Adjustable)  Metric 10/2002
M47512  PUMPS  PVV | PDF | 157 kB
PVV 540 B1 Series P-1NN/H or P-C/H Pump Control  Metric  Installation Data Sheet M47512 for Single Pressure or Soft Start with Horsepower Limit Pump Control 10/2002
M47513  PUMPS  PVV | PDF | 172 kB
PVV 540 B1 Series P-1NN/G or P-C/G Pump Control  Metric  Installation Data Sheet M47513 for Single Pressure or Soft Start with Horsepower Limiter & Load Sense Pump Control  Metric 10/2002
M47514  PUMPS  PVV | PDF | 152 kB
PVV 540 B1 Series P-2 or P-D Pump Control  Metric  Installation Data Sheet M47514 for Dual Pressure or Dual Pressure Soft Start Pump Control  Metric 10/2002
M47515  PUMPS  PVV | PDF | 155 kB
PVV 540 B1 Series P-3 or P-E Pump Control  Metric  Installation Data Sheet M47515 for Triple Pressure or Triple Pressure Soft Start Pump Control  Metric 10/2002
M47516  PUMPS  PVV | PDF | 193 kB
PVV 540 B1 Series P-2 or P-D Control  Installation Data Sheet M47516 for Dual Pressure Control with Load Sense and/or Horsepower Limiter  Metric 10/2002
M47517  PUMPS  PVV | PDF | 201 kB
PVV 540 B1 Series P-A or P-B Pump Control  Metric  Installation Data Sheet M47517 for Electronic Proportional Pressure with Load Sense and/or Horsepower Limiter Pump Control  Metric 10/2002
M47558  PUMPS  PVV | PDF | 155 kB
PVV 540 B1 Series P-1NN/F or P-C Pump Control  Metric  Installation Data Sheet M47558 for Single Pressure or Soft Start with Load Sense Pump Control  Metric 10/2002
M47569  PUMPS  PVV | PDF | 151 kB
PVV 540 B1 Series P-RNN or P-RNN/H Pump Control  Metric  Installation Data Sheet M47569 for Remote Pressure or Remote Pressure w/Horsepower Limiter Pump Control 10/2002
M47642  PUMPS  PVV | PDF | 134 kB
PVV 540 B1 Series RU Pump Control  Metric  Installation Data Sheet M47642 for Solenoid Operated Two Volume Pump Control  Metric 10/2002
M47729A  PUMPS  PVV | PDF | 158 kB
PVV 540 B1 Series VM Pump Control  Metric  Installation Data Sheet M47729A for Servo Valve Pump Control  Metric 10/2002
M47737  PUMPS  PVV | PDF | 122 kB
PVV 540 B1 Series VR Pump Control  Meric  Installation Data Sheet M47737 for Remote Servo Valve Pump Control  Metric 10/2002
PVV 200 250 540 B1 & B2 Series Pump  Instruction Bulletin 947027A for Pump Service and Parts List 2/2009
47938  PUMPS  PVV | PDF | 126 kB
PVV 200 250 & 540 B1 Series Pump Mounting Brackets  Installation Data Sheet 47938 for Foot Type Mounting Brackets 9/2000

In order to download, some browsers may require right click and save as.

Modeled with basic pressure compensation control module.

PVV 440 540 | IGS | 10 MB
Description of PVV 440 540
PVV 440 540 | STP | 9 MB
Description of PVV 440 540