Oilgear_Axial_Piston_Pump_PVV-250

The flagship, high-horsepower pump.

The PVV line of Oilgear pumps represents the pinnacle of performance in a variable-displacement, axial-piston pump. Pressure and flow demands continue to rise for our customers. The PVV is a pump that rises to the challenge.

Oilgear makes some of the longest-lasting, most reliable pumps in the world.  Learn more about the proprietary design of the Oilgear variable-displacement, axial-piston pump line.

Designed for power and speed, PVV open-loop, axial-piston hydraulic pumps by Oilgear deliver the punch that is required for large, heavy-duty systems.  Utilizing advanced engineering, the PVV pump line delivers up to 560 horsepower – four times the horsepower at approximately one-third the cost of other models.  Computer-optimized for maximum performance, PVV is compact in design and available in several displacements.

PVV pumps offer a large selection of controls that are readily interchangeable.  With improved high-response controls and reduced noise levels, the rugged cylinder design of the PVV pump enhances optimal performance.  The patented design of its pressure lubricated swashblock offers high performance for high-cycling operations, and contributes to the pump’s ability to run on low-viscosity and other special fluids.

All Oilgear pumps are designed to thrive on low-viscosity fluids, such as high water content and fire resistant fluids, like Skydrol™, Stack Magic™, Erifon™, and 98/2.  Learn more here:  Fluid Compatibility of Oilgear Pumps.

 

NOMINAL DIMENSIONS

Frame
Size
Length Width Height Weight Face Mounting
in. mm in. mm in. mm lbs kg
17.14 435,4 14.34 364,2 11.94 303,3 325 147,4 ISO 200 4-Bolt or SAE “E”

 

NOMINAL OPERATING PARAMETERS

 

Theoretical Maximum Displacement in^3/rev 15.26
ml/rev 250
Rated Continuous Pressure psi 5000
bar 345
Peak Pressure psi 5800
bar 400
Rated flow at continuous rated pressure:  Non-Supercharged 1000 rpm 59 gpm
223 lpm
1200 rpm 72 gpm
273 lpm
15000 rpm 91 gpm
344 lpm
1800 rpm 109 gpm
413 lpm
Rated flow at continuous rated pressure: Supercharged 1800 rpm 109 gpm
413 lpm
2200 rpm 134 gpm
507 lpm
Maximum Speed rpm 1800

 

NOMINAL PERFORMANCE

Curves based on an oil temperature of 125º F (160 SSU) and 14.7 psia (1 bar absolute). Efficiency curves are based on pump running at 1800 rpm.

Oilgear PVV-250 Performance Curve

  • Swashblock & integral saddle with polymerous bearings
  • Keyed or splined shaft
  • Patented pressure lubricated swashblock design
  • Sealed front shaft bearing
  • Piston shoes run on flat steel thrust plate
  • Mechanically retained shoe
  • Replaceable hardened cylinder wear plate & bronze port plate
  • Cylinder mounted polymerous journal bearings
  • Quiet port plate design

Below is a partial list of configuration options.  Please see product documentation for more detail and additional options.

  • Thru-shaft for driving multiple pumps off of one motor
  • 3 different shaft configurations for different torque ratings and tooth counts
  • ISO 200 or SAE “E” 4-bolt mounting
  • Viton, buna nitrile, or EPR seals
  • Volume reduction stops
  • Left or right hand rotation
  • Side ported or rear ported
  • Control options include:
    • Pressure compensating
      • Single setting
      • Dual setting
      • Triple setting
      • Proportional device
      • Soft start
      • Remote control
      • Load sense
      • Load sense with horsepower limiter
      • Horsepower limiter
    • Electrohydraulic (with feedback)
    • Solenoid operated volume
    • Fixed displacement

 

847028D  PUMPS  PVV | PDF | 81 kB
PVV 200 250 440 & 540 Application Guidelines  Technical Bulletin 847028D Application Guidelines 2/2010
PVV 200 250 440 & 540 Pump  Sales Bulletin 47028E for Ordering Information Features Benefits Specifications and Pump Control Options 02/2010
47938  PUMPS  PVV | PDF | 126 kB
PVV 200 250 & 540 B1 Series Pump Mounting Brackets  Installation Data Sheet 47938 for Foot Type Mounting Brackets 9/2000
PVV 200 250 540 B1 & B2 Series Pump  Instruction Bulletin 947027A for Pump Service and Parts List 2/2009
PVV 200 250 Pump Instructions  Instruction Bulletin 947029 for Pump Service and Parts List 01/1999
PVV 200 250 F Pump Control  Parts Data Sheet 947129 for F Fixed Screw Adjustable Pump Control 02/1999
947529  PUMPS  PVV | PDF | 365 kB
PVV 200 250 P-1NN Pump Control  Parts Data Sheet 947529 for Single Pressure Pump Control and Options 02/1999
PVV 200 250 V-R Pump Control  Parts Data Sheet 947738 for Electrohydraulic with Feedback Remote Servo Valve 02/1999
PVV 200 250 V-S Pump Control  Parts Data Sheet 947739 for Electrohydraulic with Feedback Integral Servo Valve Control 02/1999
PVV 200 250 R Pump Control  Parts Data Sheet 947859 for Two Position Solenoid Selector Pump Control 02/1999
47169B  PUMPS  PVV | PDF | 88 kB
PVV 200 250 B1 Series F Fixed Pump Control  Installation Data Sheet 47169B for F Fixed Volume Screw Adjustable Pump Control 6/2004
PVV 200/250 Tandem Pump Cad File Sheet 1  Installation Bulletin 6/2004
PVV 200/250 Tandem Pump Cad File Sheet 2  Installation Drawing for Four Bolt Tandem Pump Mounting Sheet 2 6/2004
47173B  PUMPS  PVV | PDF | 332 kB
PVV 200 250 B1 Series Tandem Pump  Installation Data Sheet 47173B for Four Bolt Tandem Pump Mounting 7/2004
47560B  PUMPS  PVV | PDF | 136 kB
PVV 200 250 B1 Series P-1NN or P-C Pump Control  Installation Data Sheet 47560B for Single Pressure or Soft Start Pump Control 6/2004
47561B  PUMPS  PVV | PDF | 147 kB
PVV 200 250 B1 Series P-1NN/H or P-C/H Pump Control  Installation Data Sheet 47561B for Single Pressure or Soft Start with Horsepower Limiter Pump Control 6/2004
47562B  PUMPS  PVV | PDF | 160 kB
PVV 200 250 B1 Series P-1NN/H or P-C/H Pump Control  Installation Data Sheet 47562B for Single Pressure or Soft Start with Horsepower Limiter Pump Control 6/2004
47563B  PUMPS  PVV | PDF | 172 kB
PVV 200 250 B1 Series P-1NN/G or P-C/G Pump Control  Installation Data Sheet 47563B for Single Pressure or Soft Start with Horsepower Limiter and Load Sense Pump Control 6/2004
47564B  PUMPS  PVV | PDF | 225 kB
PVV 200 250 B1 Series P-2 or P-D Pump Control  Installation Data Sheet 47564B for Dual Pressure or Dual Pressure Soft Start Pump Control 6/2004
47566B  PUMPS  PVV | PDF | 236 kB
PVV 200 250 B1 Series P-3 or P-E Pump Control  Installation Data Sheet 47566B for Triple Pressure or Triple Pressure Soft Start Pump Control 6/2004
47567B  PUMPS  PVV | PDF | 222 kB
PVV 200 250 B1 Series P-A or P-B Pump Control  Installation Data Sheet 47567B for Electronic Proportional Pump Control 6/2004
PVV 200 250 B1 Series P-A or P-B Pump Control Cad File Sheet 1  Installation Drawing Data Sheet 47567B_1.dwg for Electronic Proportional Pressure Pump Control 6/2004
PVV 200 250 B1 Series P-A or P-B Pump Control Cad File Sheet 2  Installation Drawing Data Sheet 47567B_2.dwg for Electronic Proportional Pressure Pump Control 6/2004
47568B  PUMPS  PVV | PDF | 131 kB
PVV 200 250 B1 Series P-RNN or P-RNN/H Pump Control  Installation Data Sheet 47568B for Remote Pressure or Remote Pressure with Horsepower Limiter Pump Control 6/2004
47639B  PUMPS  PVV | PDF | 116 kB
PVV 200 250 B1 Series RU Pump Control  Installation Data Sheet 47639B for RU Solenoid Operated Two Volume Pump Control 6/2004
47939A  PUMPS  PVV | PDF | 926 kB
PVV 200 250 B1 Series Pump  Installation Data Sheet 47939A Pump without Control Side/Rear Ported 6/2004
PVV 200 250 B1 Series Pump Cad File Sheet 1  Installation Drawing Data Sheet 47939B_1.dwg CAD File Sheet 1 for Pump without Control ISO Mounting 6/2004
PVV 200 250 B1 Series Pump Cad File Sheet 2  Installation Drawing Data Sheet 47939B_2.dwg CAD File Sheet 2 for Pump without Control ISO Mounting 6/2004
PVV 200 250 B1 Series Pump Cad File Sheet 3  Installation Drawing Data Sheet 47939B_3.dwg CAD File Sheet 3 for Pump without Control ISO Mounting 6/2004
PVV 200 250 B1 Series Pump Cad File Sheet 4  Installation Drawing Data Sheet 47939B_4.dwg CAD File Sheet 4 for Pump without Control ISO Mounting 6/2004
M47169B  PUMPS  PVV | PDF | 83 kB
PVV 200 250 B1 Series F Fixed Pump Control  Metric  Installation Data Sheet M47169B for Fixed Volume Screw Adjustable Pump Control 6/2004
M47173B  PUMPS  PVV | PDF | 306 kB
PVV 200 250 B1 Series Tandem Pump  Metric  Installation for Four Bolt Tandem Pump Mounting  Metric 6/2004
M47560B  PUMPS  PVV | PDF | 127 kB
PVV 200 250 B1 Series P-1NN or P-C Pump Control  Metric  Installation Data Sheet M47560B for Single Pressure or Soft Start Pump Control  Metric 6/2004
M47561B  PUMPS  PVV | PDF | 140 kB
PVV 200 250 B1 Series P-1NN/H or P-C/H Pump Control  Metric  Installation Data Sheet M47561B for Single Pressure or Soft Start with Horespower Limiter Pump Control  Metric 6/2004
M47562B  PUMPS  PVV | PDF | 150 kB
PVV 200 250 B1 Series P-1NN/H or P-C/H Pump Control  Metric  Installation Data Sheet M47562B for Single Pressure or Soft Start with Horsepower Limiter Pump Control  Metric 6/2004
M47563B  PUMPS  PVV | PDF | 166 kB
PVV 200 250 B1 Series P-1NN/G or P-C/G Pump Control  Metric  Installation Data Sheet M47563B for Single Pressure or Soft Start with Horsepower Limiter and Load Sense Pump Control  Metric 6/2004
M47564B  PUMPS  PVV | PDF | 134 kB
PVV 200 250 B1 Series P-2 or P-D Pump Control  Metric  Installation Data Sheet M47564B for Dual Pressure or Dual Pressure Soft Start Pump Control  Metric 6/2004
M47566B  PUMPS  PVV | PDF | 236 kB
PVV200 250 B1 Series P-3 or P-E Pump Control  Metric  Installation Data Sheet M47566B for Triple Pressure or Triple Pressure Soft Start Pump Control  Metric 6/2004
PVV 200 250 B1 Series P-A or P-B CAD File Sheet 1  Metric  Installation Data Sheet M47567B_1.dwg for Electronic Proportional Pressure with Load Sense and/or Horsepower Limiter Pump Control  Metric 6/2004
PVV 200/250 B1 Series P-A or P-B Pump Control Cad File Sheet 2  Metric  Installation Drawing Data Sheet M47567B_2.dwg for Electronic Proportional Pressure Pump Control  Metric 6/2004
M47567B  PUMPS  PVV | PDF | 216 kB
PVV 200 250 B1 Series P-A or P-B Pump Control  Metric  Installation Data Sheet M47567B for Electronic Proportional Pressure Pump Control  Metric 6/2004
M47568B  PUMPS  PVV | PDF | 123 kB
PVV 200 250 B1 Series P-RNN or P-RNN/H Pump Control  Metric  Installation Data Sheet M47568B for Remote Pressure or Remote Pressure with Horsepower Limiter Pump Control  Metric 6/2004
M47639B  PUMPS  PVV | PDF | 109 kB
PVV 200 250 B1 Series RU Pump Control  Meric  Installation Data Sheet M47639B for RU Solenoid Operated Two Volume Pump Control  Metric 6/2004
PVV 200 250 B1 Series Pump Cad File Sheet 1  Metric  Installation Drawing Data Sheet M47939B_1.dwg CAD File Sheet 1 for Pump without Control ISO Mounting  Metric 6/2004
PVV 200 250 B1 Series Pump Cad File Sheet 2  Metric  Installation Drawing Data Sheet M47939B_2.dwg CAD File Sheet 2 for Pump without Control ISO Mounting  Metric 6/2004
PVV 200 250 B1 Series Pump Cad File Sheet 3  Metric  Installation Drawing Data Sheet M47939B_3.dwg CAD File Sheet 3 for Pump without Control ISO Mounting  Metric 6/2004
PVV 200 250 B1 Series Pump Cad File Sheet 4  Metric  Installation Drawing Data Sheet M47939B_4.dwg CAD File Sheet 4 for Pump without Control ISO Mounting  Metric 6/2004
M47939B  PUMPS  PVV | PDF | 511 kB
PVV 200 250 B1 Series Pump  Metric  Installation Data Sheet M47939B Pump without Control Side Ported  Metric 6/2004

In order to download, some browsers may require right click and save as.

Modeled with basic pressure compensation control module.

PVV_200_250 | IGS | 7 MB
PVV_200_250 | STP | 4 MB